[SMM Stainless Steel Daily Review] SS Futures Fluctuated Steadily as Chinese New Year Holiday Approached, Most Stainless Steel Traders Already on Holiday

Published: Feb 9, 2026 16:17
[SMM Stainless Steel Daily Review] SS Futures Fluctuate Rangebound Ahead of Chinese New Year Holiday, Most Stainless Steel Traders on Holiday SMM, February 9: SS futures showed a relatively strong and rangebound fluctuation pattern. The phased impact from the macro perspective gradually faded, and with the approaching Chinese New Year holiday in China, market activity declined. SS futures operated on a relatively stable tone, finally closing at 13,735 yuan/mt. In the spot market, most traders have entered the holiday period, and those not yet on holiday are mostly in the closing stage. A small number of transactions mainly focused on post-holiday futures orders, with prices overall basically stable. The most-traded SS futures contract was in the doldrums. At 10:30 a.m., SS2603 was quoted at 13,770 yuan/mt, up 15 yuan/mt from the previous trading day. In Wuxi, the spot premiums/discounts for 304/2B were in the range of 400-600 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi was reported at 8,500 yuan/mt; the average price of cold-rolled mill-edge 304/2B coil was 14,100 yuan/mt in Wuxi and 14,050 yuan/mt in Foshan; cold-rolled 316L/2B coil in Wuxi was 26,600 yuan/mt, and in Foshan 26,600 yuan/mt; hot-rolled 316L/NO.1 coil in Wuxi was quoted at 25,750 yuan/mt; cold-rolled 430/2B coil in both Wuxi and Foshan was 7,800 yuan/mt. This week, repeated fluctuations in macro sentiment combined with a significant pullback in precious metal prices dragged down the overall nonferrous metals futures, and stainless steel futures also showed wild swings in sync. At the beginning of the week, they once hit the limit down, then gradually staged a restorative rebound, …

 

SMM February 9, SS futures showed a relatively strong and rangebound fluctuation pattern. The phased impact from the macro perspective gradually faded, and with the approaching Chinese New Year holiday, market activity declined. SS futures operated on a relatively stable tone and finally closed at 13,735 yuan/mt. In the spot market, most traders had already entered the holiday, and those who had not were mostly in the closing stage. A small number of transactions were mainly concentrated on post-holiday futures orders, with prices overall basically stable.

The most-traded SS futures contract fluctuated weakly. At 10:30 a.m., SS2603 was quoted at 13,770 yuan/mt, up 15 yuan/mt from the previous trading day. In Wuxi, the spot premium/discount for 304/2B was in the range of 400-600 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi was reported at 8,500 yuan/mt; the average price of cold-rolled mill-edge 304/2B coil was 14,100 yuan/mt in Wuxi and 14,050 yuan/mt in Foshan; the price of cold-rolled 316L/2B coil in Wuxi was 26,600 yuan/mt, and in Foshan it was 26,600 yuan/mt; the price of hot-rolled 316L/NO.1 coil in Wuxi was reported at 25,750 yuan/mt; the price of cold-rolled 430/2B coil in both Wuxi and Foshan was 7,800 yuan/mt.

This week, repeated fluctuations in macro sentiment, combined with a significant pullback in precious metal prices, dragged down the overall nonferrous metals futures, and stainless steel futures also showed wild swings in sync. At the beginning of the week, prices once hit the limit down, and although a restorative rebound gradually unfolded afterwards, the overall weak trend did not fundamentally reverse. The spot market was dragged down by futures fluctuations and moved downward in sync, with market sentiment fluctuating along with the futures, overall tending to be cautious and conservative. As the Chinese New Year holiday approached, some traders had already taken leave and left the market this week, and market trading activity continued to decline. Only during the brief period of the futures' restorative rebound did downstream users conduct a small amount of rigid demand restocking; overall transactions remained sluggish. Inventory side, stainless steel social inventory showed a slight buildup this week, but the overall inventory level remained at a historically low range, and traders' inventory pressure was relatively limited. Coupled with market expectations for a positive consumption season after the holiday (the "Golden March, Silver April"), there was no panic selling phenomenon, which to some extent alleviated the downward pressure on spot prices. In February, stainless steel mills will successively start their annual maintenance plans, and planned production is expected to decrease significantly. However, downstream end-use industries also enter the Chinese New Year holiday simultaneously, and demand will stagnate phase by phase. The positive effect of supply reduction is offset by demand contraction, providing relatively limited support to market prices. Cost side, prices of high-grade NPI and stainless steel scrap pulled back, and stainless steel production costs declined in sync. Currently, steel mills can still maintain a slight profit, and the cost side provides some bottom-line support. Overall, this week the stainless steel market was dominated by futures and macro sentiment, with relatively weak fundamental support from the spot market. Combined with factors such as sluggish pre-holiday transactions and traders leaving for the holiday, the market showed a weak and rangebound pattern. However, favorable factors such as relatively low inventory, positive post-holiday expectations, and cost support effectively limited the downside room for prices. In the short term, sentiment-driven capital flows before the holiday and fluctuations in futures will continue to dominate market trends. Going forward, close attention should be paid to the macroeconomic trajectory and the pace of recovery in downstream demand after the holiday.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
15 hours ago
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
Read More
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
TECO Electric & Machinery has signed an agreement to invest about MYR 200 million, or roughly $50.8 million, to acquire about 78% of Malaysian engineering company Dynaciate Engineering. TECO said Dynaciate will become its global manufacturing hub for modular data center and power equipment products, while also serving as an engineering hub for its expansion in Southeast Asia’s data center infrastructure market.
15 hours ago
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
May 25, 2026 18:26
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
Read More
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
SS-H2 can operate in seawater at voltages of up to 1700 mV, well above the stable operating range of regular stainless steel. The report said this improved performance could help address corrosion and durability issues in seawater electrolysis systems, suggesting expanding potential for advanced stainless steel in hydrogen equipment applications.
May 25, 2026 18:26
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
May 25, 2026 18:25
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
Read More
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
A research team at the University of Hong Kong has developed a new stainless steel called SS-H2 for seawater-based hydrogen production systems. The reports said the material is designed to maintain stronger corrosion resistance under harsh, high-voltage operating conditions and could potentially replace more expensive titanium components now used in electrolyzers. The development is seen as a possible new materials route for lowering the cost of green hydrogen equipment.
May 25, 2026 18:25
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?sign in here