BHP's iron ore production and sales volumes declined simultaneously in Q1 2025

Published: Apr 22, 2025 15:58

Australian mining company BHP has released its operational report for Q1 2025 (Q3 of the 2025 Australian fiscal year), which indicates the following:
Production:BHP's iron ore production in Q1 2025 was 67.844 million mt, down 7.2% MoM and 0.4% YoY. The main reasons for the decline include the short-term impact of tropical cyclones "Zelia" and "Sean," the phased adverse effects of the railway technology project (RTP1) connection operations, and ongoing production cuts due to the depletion of Yandi resources.

Despite these challenges, BHP has maintained its production targets by optimizing production efficiency and structural growth momentum. For example, the Central Pilbara Hub completed capacity ramp-up at the South Flank mine, coupled with optimized handling after the completion of the port debottlenecking project, resulting in a 13% YoY improvement in supply chain efficiency, which became a key driver of production growth. Among them, Mining Area C and Jimblebar mine stood out, with production increasing by 11.8% and 3.4% YoY, respectively, fully reflecting the effectiveness of new capacity releases and operational optimizations. However, the main Newman mine area experienced a 20.2% YoY decline in production due to weather disruptions and a decline in ore quality.

Meanwhile, BHP's production resumptions at its Samarco joint venture in Brazil have exceeded expectations since the restart of the second beneficiation plant in December last year. In Q1, iron ore pellet production increased by 11.1% MoM and 39.3% YoY. Based on current progress, Samarco is expected to achieve its annual production capacity target of 16 million mt of pellets ahead of schedule by the end of June this year. BHP has maintained its annual production guidance for Samarco at 5-5.5 million mt (on a 50% equity basis) in its latest quarterly report, but expects actual production to be closer to the upper end of the range.


Shipments:BHP's iron ore sales in Q1 2025 were 66.765 million mt, showing a dual decline: down 8% MoM and 4.3% YoY. Among them, fines sales were 40.412 million mt, down approximately 8.2% MoM, and lump sales were 18.822 million mt, down approximately 7.4% MoM.

In addition, as of the end of Q1 2025, BHP's production for the 2025 fiscal year was 213 million mt, up 1.1% YoY. BHP's WAIO fiscal year production guidance target remains unchanged at 282-294 million mt (on a 100% basis).


Financials: In Q1, FMG's C1 cash cost was $17.53/wmt (based on Pilbara hematite), down 4% MoM and 7% YoY.
Furthermore,the shipment target guidance for the 2025 fiscal year is 190-200 million mt, with a C1 cost target of $18.5-19.75/wmt (based on Pilbara hematite).


 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
【SMM Steel】Jubilee restores Roan concentrator operations in Zambia
45 mins ago
【SMM Steel】Jubilee restores Roan concentrator operations in Zambia
Read More
【SMM Steel】Jubilee restores Roan concentrator operations in Zambia
【SMM Steel】Jubilee restores Roan concentrator operations in Zambia
【SMM Steel】Jubilee Metals Group has resumed full capacity at its Roan concentrator in Ndola Zambia targeting monthly run-of-mine throughput of 30000 tonnes following scheduled annual maintenance. Upgrades include an expanded copper oxide flotation circuit designed to boost recovery efficiency by 5% offsetting higher transport costs. Jubilee also commissioned a new fine copper concentrate dewatering facility to manage a stream representing about 25% of Roan's feedstock copper with material transported to its Sable refinery in Kabwe. The company is also evaluating an additional DMS circuit to potentially expand throughput.
45 mins ago
【SMM Steel】Turkey's Kardemir successfully commissions advanced KOCKS RSB line
46 mins ago
【SMM Steel】Turkey's Kardemir successfully commissions advanced KOCKS RSB line
Read More
【SMM Steel】Turkey's Kardemir successfully commissions advanced KOCKS RSB line
【SMM Steel】Turkey's Kardemir successfully commissions advanced KOCKS RSB line
【SMM Steel】Turkish steelmaker Kardemir has achieved initial production on a new-generation KOCKS Reducing & Sizing Block line at its bar and coil rolling mill. The equipment integrated with process optimization and real-time monitoring met targeted tolerance and ovality values. The modernization enables high-speed production of high-value steel grades including SBQ bars 20-105 mm and thick coils 20-56 mm. The investment serves automotive railway machinery and construction industries aiming to expand high-value product capacity and strengthen Kardemir's export competitiveness.
46 mins ago
【SMM Steel】SSAB upgrades Oxelösund plant for commercial steel powder production
47 mins ago
【SMM Steel】SSAB upgrades Oxelösund plant for commercial steel powder production
Read More
【SMM Steel】SSAB upgrades Oxelösund plant for commercial steel powder production
【SMM Steel】SSAB upgrades Oxelösund plant for commercial steel powder production
【SMM Steel】SSAB is expanding its Oxelösund steel powder facility for additive manufacturing to commercial scale in partnership with SMS group. Construction is scheduled to begin in 2026 with production ramping up gradually from Q1 2028 targeting annual capacity of 350 tonnes and creating 20 jobs at full operation. The project serves growing demand from defense automotive and engineering sectors enabling lighter components with less waste and shorter lead times. SSAB's specialized steel powders require no subsequent heat treatment and can replace aluminum as a lightweight material in certain engineering applications.
47 mins ago