News

Exclusive analysis article with latest market updates, and in-time news feeds.

[SMM Analysis] Explaining Indonesia's Centralized State-run Management of Resource Exports and Future Possibilities
On May 20, 2026, Indonesian President Prabowo Subianto announced during a plenary session of the National Congress that the government has officially signed a groundbreaking regulation targeting the governance of natural resource exports. This bold policy framework will establish a dedicated state-managed natural resource export agency, executing exports through State-Owned Enterprises (BUMN) acting as government-designated single exporters. According to local media disclosures and presentation slides shown during the session, this centralized mechanism will initially apply to palm oil, coal, and ferroalloys (paduan besi). Under this system, direct private export transactions will be phased out, forcing overseas buyers and Indonesian producers to route contracts, logistics, and payments entirely through state-appointed BUMN nodes. 1. The Two-Phase Implementation Timeline Based on the official policy schematic diagrams disclosed on-site, the transition to a centralized BUMN-led export model will occur in two distinct regulatory phases: Phase 1 (Transition) Time : June 1, 2026 - August 31, 2026 Mechanics : Private enterprises continue to manage some internal administrative and logistics steps. However, all existing and new import-export transactions with overseas buyers must begin a step-by-step migration to BUMN entities. Phase 2 (Full Monopsony) Time : September 1, 2026, Onward Mechanics : Complete takeover. All transaction flows, sales contracts, export declarations, customs clearance, shipping arrangements, and the collection of export earnings (DHE) will be fully managed or led by designated BUMN. 2. Deep Structural Intervention: Pre- to Post-Clearance This regulatory mechanism does not simply install a government "rubber stamp." Instead, it represents a fundamental reallocation of the entire export trade chain, deeply embedding BUMN across three key logistics and financial phases: [Pre-Clearance] ──> [Clearance] ──> [Post-Clearance] (Contracts & Docs) (Customs & Loading) (Payment & FX DHE) Pre-Clearance (Contract & Goods Preparation): This covers verifying legality, IUP mining licenses, export restrictions (Lartas) compliance, sales contract drafting, finalizing payment terms, commercial invoicing, and vessel chartering/cabin bookings. Clearance (Customs & Physical Shipment): Includes filing export declarations (PEB), managing customs system approvals, cargo transport from smelter warehouses to port terminals, loading shipments, and issuing Bills of Lading (B/L). Post-Clearance (Documentation & Capital Flow): BUMN will act as the principal intermediary, dispatching trade documents (B/L, Commercial Invoice, Packing List, Certificate of Origin/COO) to the buyer's issuing bank and managing the repatriation of export proceeds (DHE) under strict domestic banking provisions. 3. The Billion-Dollar Question: Will NPI and FeNi be Classified as "Ferroalloys"? For the global stainless steel and electric vehicle battery supply chains, the immediate focal point is how Indonesia defines the scope of "ferroalloy" (paduan besi). Market consensus strongly suggests that the "ferroalloys" under discussion are highly likely targeting Nickel Pig Iron (NPI), which represents a massive trade flow of approximately 11.5 million tons of Indonesian NPI exports in 2025. However, because the official, legally binding regulation "signed" by the government has not yet been formally released to the public, further clarification is needed to verify the exact scope of affected materials. Crucially, the leaked written draft of the regulation does not actually mention "ferroalloys" at all. The term "ferroalloy" (paduan besi) was only verbally highlighted and presented by President Prabowo during the House of Representatives Plenary Session (Rapat Paripurna DPR) on Wednesday (20/5). According to the leaked draft text, the actual written scope of the law is structured as follows: CHAPTER II: DETERMINATION OF STRATEGIC NATURAL RESOURCE COMMODITIES Article 2 (1) Strategic Natural Resource Commodities subject to export governance include: a. coal; b. palm oil; and c. other strategic natural resource commodities. (2) The Government may amend the Strategic Natural Resource Commodities as referred to in paragraph (1) letters a and b, and establish other Strategic Natural Resource Commodities as referred to in letter c through a coordinated meeting (rapat koordinasi) led by: a. the minister responsible for synchronization, coordination, and control of ministerial affairs in the field of the economy (Coordinating Minister for Economic Affairs / Menko Perekonomian); or b. the minister responsible for synchronization, coordination, and control of ministerial affairs in the field of food (Coordinating Minister for Food / Menko Pangan), attended by relevant ministers/heads of non-ministerial agencies. This clause reveals a crucial legal framework: any expansion of the export control list to designate NPI, FeNi, or related ferronickel alloys under "other strategic commodities" is strictly required to be determined through a formal coordinated meeting (rapat koordinasi) led by either the Coordinating Minister for Economic Affairs or the Coordinating Minister for Food. Because the written regulation itself is silent on "ferroalloys," the legal scope of the policy has not been fixed yet. Until this high-level inter-ministerial coordination meeting (rapat koordinasi) takes place and issues a definitive annex list with matching HS codes, the practical impact on NPI trade remains pending official confirmation. Should nickel-iron intermediates formally fall under the BUMN single-exporter mandate after this meeting, SMM foresees four critical structural disruptions: I. Erosion of Direct Negotiation Flexibility Currently, Indonesian NPI is sold through a highly flexible ecosystem of steel mills, global trading desks, independent brokers, and back-to-back supply contracts. Forcing these contracts to route through a single state exporter compresses the operational room for direct price discovery, spot volume locking, and rapid high-frequency reselling. II. Absolute Export Price Transparency By funneling all sales contracts, shipping invoices, and foreign exchange collection (DHE) through state-owned channels, the Indonesian government will gain real-time, absolute transparency over actual transaction prices. This complements Indonesia's ongoing tightening of domestic mining benchmarks (HPM), the annual RKAB quota system, and the strict requirement for export proceeds to be held in domestic bank accounts. III. Disintermediation of Traders and Brokers In-transit or port-stored nickel-iron inventories have historically served as highly liquid financial assets for brokers and traders who leverage transfer orders and back-to-back contracts. Standardizing all contract entities and payment channels under BUMN will squeeze the margins of non-producing traders, rendering physical spot market quotes highly rigid. IV. Export Execution Delays Migrating long-term off-take agreements to BUMN templates will trigger significant friction during the Phase 1 transition. SMM expects delays stemming from contract re-signings, banking channel adjustments, letter of credit (L/C) re-issuances, and initial administrative coordination at port customs, temporarily disrupting short-term port-arrival schedules. 4. Market and Price Impact Analysis (If NPI were to be Involved) Short-Term Sentiment vs. Medium-Term Realities Short-Term (Sentiment-Driven): The direct impact on physical NPI shipping volumes returning to China will remain limited during the initial transition window, as private exporters continue to assist with logistics. However, given tight domestic nickel ore supplies, production cuts at several RKEF plants, and already declining NPI shipments, the market will likely digest this announcement as a fresh supply-side threat, driving up bullish sentiment. Medium-Term (Structural Shifts): If NPI is formally included in the HS code list, Chinese stainless steel mills will face centralized Indonesian state sellers. This will result in stronger payment scrutiny, fewer options for non-standard flexible transactions, and the virtual elimination of low-cost, off-market FOB deals. Transaction Costs vs. Production Costs Unlike mining-end disruptions such as rising HPM benchmarks, declining laterite ore grades, or restricted RKAB quotas, this export centralization policy does not directly raise the physical smelting cost of NPI. Instead, it functions as a tax on transaction efficiency, increasing compliance burdens, administrative delays, and state oversight on pricing. SMM concludes that the impact of this policy is an increase in "transaction-side friction" rather than raw production costs, which will ultimately support sellers' intentions to hold prices firm and reinforce the price rigidity of high-nickel pig iron. 5. SMM Outlook Indonesia’s new export regulation signals that its resource nationalism is successfully extending its reach beyond the mine gate and tax office, directly into the global sales and trading arena. However, the key takeaway is that nothing is legally set in stone for the nickel industry yet. Because the written regulation currently leaves the door open under "other strategic commodities," and the word "ferroalloy" was only delivered verbally by the President on Wednesday (20/5), the entire framework remains unfixed. The critical indicator for the nickel chain over the coming weeks is whether the upcoming inter-ministerial rapat koordinasi formally adopts the HS codes for NPI and FeNi into the final regulatory annex.
May 20, 2026 18:42
[SMM Analysis] Explaining Indonesia's Centralized State-run Management of Resource Exports and Future Possibilities
[SMM Conference] 2026 SMM (3rd) GRMI: Gathering Industry Leaders amid Global Push for Sustainable Development
[SMM Conference] 2026 SMM (3rd) GRMI: Gathering Industry Leaders amid Global Push for Sustainable Development
On May 12, the 2026 SMM (3rd) Global Renewable Metal Industry Chain Summit & Battery Recycling Forum , organized by Shanghai Metals Market (SMM), drew to a successful close at the Sheraton Grande Tokyo Bay Hotel in Tokyo, Japan! Conference Background Driven by global sustainable development and circular economy initiatives, recycled metals and battery recycling have gained growing strategic importance. Facing rising metal demand and dwindling natural resources, recycling stands out as an eco-friendly and cost-effective alternative, backed by supportive policies and investment worldwide. As a major Asian recycling powerhouse, Japan boasts robust secondary metal output and sophisticated recycling technologies. It has also rolled out massive funding plans to expand e-waste recycling infrastructure and scale up relevant processing capacity. Centered on the theme "Low Carbon, Global Echoes", the 2026 GRMI gathered worldwide enterprises, experts and officials to exchange insights on circular economy trends, technological breakthroughs and industry policies. This event comprises three forums ( Main Forum, Recycling Forum, and Renewable Resources Equipment Forum ) and multiple panel sessions. Key Highlights Reshaping the Global Recycled Metal Market — Policy Drivers and New Hotspots in India, Pakistan, the Middle East & Japan Shifting Dynamics in Southeast Asia's Recycled Metals: The Malaysia-Thailand Trade Decline and Vietnam's Rising Recycling Economy Resource Contention in the Secondary Lead Market: Redefining the Global Supply Chain Interpreting Recycled Copper Policies in China, the US, Europe, and Japan and Strategies for Future Raw Material Competition Innovation Drives Green Recycling: the Technological Frontier of China's Flotation, Crushing and Sorting Equipment Breaking Through the Challenges of the Recycling Industry: Real-World Case Studies from High-Quality Suppliers Click to view photo gallery Main Forum Opening Remarks Adam Fan, Chairman, SMM Hao Qi Chairman, KINKI SANGYO CO.LTD. May 11 Main Forum Keynote Speeches [Keynote Speech] - Global Recycled Metals Industry Market Analysis: Policy Instruments, Corporate Responses, and Future Challenges Speaker: Rock Ding, Consulting Project Manager, SMM Rock expects that aluminum scrap production will continue to grow in the future, and global aluminum scrap supply and demand will maintain a tight balance before 2030. Regarding the copper scrap market, SMM expects that from 2026 to 2030, global copper scrap market supply and demand will continue to grow, and the market will remain in a state of persistently tight supply. The global recycling industry faces challenges including shortages of recycled raw materials supply, rising resource protectionism, cross-border logistics and transportation restrictions, lack of unified global governance, bottlenecks in recycling technology, and incomplete recycling system development. [Keynote Speech] - From India to the World: Sustainable Growth and Responsibility of a Leading Recycler Speaker: Sanchit Jain, Executive Director, Jain Resource Recycling Limited Developed markets (North America, Europe) generate over 70% of the world's scrap; North America has a recycling input rate of 57%, and Europe's aluminum recycling rate reaches 81% — yet their demand growth has slowed down, with scrap becoming a surplus resource exported abroad; Developing countries are where demand is surging — yet collection rates remain below 5%, dominated by informal operators lacking traceability; Globally, policies and market initiatives promoting traceability of recycled resources and ESG disclosure are accelerating at an increasing pace. Scrap generation and consumption exhibit a regional mismatch, with the resource gap formed by supply-demand misalignment increasingly demonstrating strategic significance; Scrap is no longer simply surplus off-cuts, but a core strategic resource reshaping the global recycled resource trade landscape. Recycling Has Become a Core Pillar for Industrial Incremental Growth Why Does the Recycling Industry Hold Critical Strategic Value Today? Secondary resource supply can cover over 40% of future incremental metal demand; reducing dependence on highly volatile primary ore resources. Recycling is the optimal viable pathway for the industry to achieve sustainable and scalable development. [Keynote Speech] - URBAN MINING India's Non-Ferrous Recycling Decade Opportunities & Challenges from a Smelter's Perspective speaker: Pratik Gupta, Assistant Vice President - Operations, Pondy Oxides and Chemicals Ltd Four Core Drivers in Resonance, Continuously Driving Steady Expansion of India's Non-Ferrous Metal Demand 1. Energy Transition Acceleration India has set a clear target of achieving 500GW of non-fossil energy installed capacity by 2030. Power grid expansion, power transmission line construction, and renewable energy integration infrastructure are advancing comprehensively—all of which are high-consumption areas for copper and aluminum, directly boosting rigid demand for both metals. 2. Accelerating EV Penetration India has set a development target of 30% new energy vehicle penetration rate by 2030. A single EV uses approximately 3–4 times the amount of copper compared to traditional internal combustion engine vehicles. Meanwhile, the development of the power battery industry will give rise to an independent scrap recycling system, further opening up incremental space for non-ferrous metals. 3. Large-Scale Infrastructure Investment Implementation Leveraging the 11.1 billion rupee National Infrastructure Pipeline plan, projects including galvanized steel, power infrastructure, and urban rail transit will continue to be implemented over the next decade, providing sustained long-term support for zinc, copper, and aluminum market demand. 4. Manufacturing PLI Policy Empowerment India's Production Linked Incentive (PLI) scheme covers 14 key industries, focusing on metal-intensive sectors such as electronics, automotive, power battery, and capital goods. With policy support, the share of domestic manufacturing continues to rise, driving steady growth in non-ferrous metal consumption. Panel Discussion: Reshaping the Global Recycled Metal Market — Policy Drivers and New Hotspots in India, Pakistan, the Middle East & Japan Moderator: Adam Fan, Chairman, SMM Panelists: Sanjeev Phadke, The Treasurer of BMR, Bureau of Middle East Recycling (BMR) Amar Singh, Secretary General, Material Recycling Association of India (MRAI) Bin Zhang, Trade Director, TOUCHI INTERNATIONAL CORP. Jawed Ahmed, Founder and CEO, Al Qaryan International DMCC Recycling Forum Ketnoye Speech: Key Issues and Challenges Affecting the US Secondary Metals Industry Speaker: Adam Shaffer, Vice President of International Trade and Global Affairs, REMA Panel Discussion Shifting Dynamics in Southeast Asia's Recycled Metals: The Malaysia-Thailand Trade Decline and Vietnam's Rising Recycling Economy Moderator: Rock Ding, Consulting Project Manager, SMM Panelists: Eric Tan, President, Malaysia Nonferrous Metals Association Achirawat Thanasethatokul, Managing Director, Mahanakorn Metalscrap Co., Ltd. Jimin Choi, CEO/Founder, ETREE PTE LTD Michelle Leung, Head of Asia Metals and Mining Sustainability, Bloomberg Intelligence [Keynote Speech] - Analysis of Japan's Recycled Copper Market Speaker: AW YONG YI CHEONG, Senior Secondary Copper Analyst, SMM AW YONG YI CHEONG noted that the current Japanese copper scrap market is gradually transitioning toward a highly competitive "seller ecosystem." Trading models that rely solely on spot cargo procurement are increasingly exposed to the risk of supply disruptions. To secure long-term resource supply, enterprises purchasing externally from outside China need to move beyond traditional spot trading mindsets and establish structural cooperative relationships through deep-binding approaches such as signing long-term contracts and equity partnerships, in order to adapt to the persistently tight market landscape. Panel Discussion Resource Contention in the Secondary Lead Market: Redefining the Global Supply Chain Moderator: Rock Ding, Consulting Project Manager, SMM Panelists: Pratik Gupta, Assistant Vice President - Operations, Pondy Oxides and Chemicals Ltd Eric Tan, President, Malaysia Nonferrous Metals Association Panel Discussion Interpreting Recycled Copper Policies in China, the US, Europe, and Japan and Strategies for Future Raw Material Competition Moderator: AW YONG YI CHEONG, Senior Secondary Copper Analyst, SMM Panelists: Allan Zhang, Head of the Recycled Copper Business Unit, Hailiang Group Co., Ltd. Mr. Vishal Jatia, CEO, GREENLAND AMERICA INC WENCESLAO MANZANO HERNANDEZ, Director, DIMEXA HOLDINGS PTE. LTD. Shunsuke Kuwada, Overseas Manager, Hirata Corporation Co.,Ltd Yoshimichi Murakami, Executive Director, Wakoh Metal Co., Ltd. [Keynote Speech] - Current Status of Lead-Acid Battery in Japan Speaker: Yuji Tanamachi, CEO, IRUNIVERSE The volume of lead-acid battery scrap generated in Japan continues to decline. The reason is the sharp decrease in the number of end-of-life vehicles (ELVs) retired in China. Over a decade ago, the number of ELVs generated in Japan exceeded 5 million units, but now it is approximately 2.7 million units, nearly halved. The chart on the right shows the increase in the average service life of passenger vehicles. The significant decline in ELV numbers was mainly driven by two factors: first, continued decline in new car sales in Japan, directly driven by population decline; second, the climbing scale of used car exports. Since the auction model was popularized in Japan a decade ago, not only ordinary used cars but even retired vehicles could be traded through auctions. Logically, a decrease in total ELV numbers should lead to a corresponding reduction in the number of dismantling enterprises. However, the reality was quite the opposite: the number of dismantling enterprises backed by ex-China capital from Iran, Saudi Arabia, Syria, the Kurdish region, and China continued to grow. Award Ceremony SMM Recycled Metals Industry Premium Scrap Yards SMM Recycled Metals Industry Premium Traders SMM Recycled Metals Industry Premium Equipment Enterprises May 12 Renewable Resources Equipment Forum Panel Discussion Innovation Drives Green Recycling: the Technological Frontier of China's Flotation, Crushing and Sorting Equipment Moderator: Bo Zhou, EVP, SMM Panelists: Owen Liang, Deputy General Manager, Foshan GreenField Environmental Protection Machinery Equipment Co., Ltd. Xian Lu, Chairman, Shandong Luyou renewable resources equipment Co., Ltd. Haihua Cheng, International Trade Minister, Jiangsu Huahong Technology Stock Co.,Ltd. [Keynote Speech] - Volatility Eats Margins for Breakfast Managing Risk Now That Tariffs, Geopolitics, And Supply Shocks Have Driven Base Metal Prices to Multi-year Extremes Speaker: Harsha Ramesh, CEO & Co-founder, Pillar Hedge Aluminum—Supply Shock From February to April 2026, aluminum prices surged by over 20% at their peak within just two months, driven by the following key factors: Strait of Hormuz Disruption: Iran conflict closes shipping lanes; approximately 9% of global supply at risk Gulf Production Hit: EGA flagship plant shut down for up to one year; Bahrain's ALBA halted Compounding Tariff Impact: US Midwest premiums widened significantly, tariffs reshaped physical trade flows Keynote Speech: Precision Sorting Green Future Speaker: Jianan Li, Overseas Sale, Zhejiang Tianli Equipment Technology Co., Ltd. [Panel Discussion] - Breaking Through the Challenges of the Recycling Industry: Real-World Case Studies from High-Quality Suppliers Networking among medium-to-large-scale scrap yards/traders Conference Check-in The 2026 SMM (3rd) Global Renewable Metal Industry Chain Summit & Battery Recycling Forum has now come to a successful conclusion. We sincerely appreciate the strong support from all industry participants and partners. Looking forward to meeting you again next year!
May 20, 2026 13:39
Copper Concentrate TCs Break Through Negative Triple Digits: What Challenges Do Smelters Face?
Copper Concentrate TCs Break Through Negative Triple Digits: What Challenges Do Smelters Face?
I. Market Status: Negative TCs Enter Triple Digits, Structural Tightening in Copper Concentrate Supply-Demand As global smelter capacity continues to climb, China, as the world's largest copper smelting country, faces a continuously declining self-sufficiency rate in copper concentrates and rising external dependency. Compounded by geopolitical crises, production cuts by ex-China miners, declining mine grades, and frequent production accidents, the copper industry has undergone a dramatic shift from "tight balance" to "structural deficit." Currently, the global copper concentrate market has fallen into a state of persistently tight supply. On May 15, the SMM Imported Copper Concentrate Index (weekly) reported -$102.84/dmt, breaking through the -$100/dmt threshold for the first time in history, setting a record negative depth. The payable indicator for 20%-grade domestic trade ore was 97.5%-98.5%, up 0.5 percentage points MoM. Supply-side factors driving TCs persistently lower continue to accumulate. 1) Full production resumptions at Freeport's Grasberg mine have fallen short of expectations. According to Freeport's Q1 earnings call, the company plans to achieve full production resumptions by the end of 2027; 2) The Peruvian government signed Emergency Decree No. 003-2026 on May 11, triggering widespread market concerns over the country's energy supply and copper mine output; 3) Geopolitical disruptions—the continued blockade of the Strait of Hormuz has driven sulfur prices persistently higher, pushing smelting acid prices to rise continuously. With smelting profits climbing, smelters' purchase willingness has increased, driving copper concentrate TCs persistently lower. Customs data showed that China's copper ore and concentrate imports in April 2026 were 2.352 million mt in physical content, down 19.57% YoY; cumulative imports from January to April were 9.915 million mt in physical content, down 0.8% compared to the same period last year. Since December 2020, China's copper concentrate cumulative imports had maintained positive YoY growth; this marks the first decline in over five years. II. Smelter Operating Rates Stay High Contrary to the intuition of "industry-wide losses" implied by deeply negative TCs, operating rates at China's copper smelters have not experienced a cliff-like decline. From a pure smelting perspective, operating willingness and actual profitability across different types of enterprises show significant divergence. Under the extreme environment of deeply negative TCs, the core reason China's copper smelters can maintain relatively resilient operations is that by-product revenues are becoming the key variable determining break-even. Meanwhile, China's copper cathode production declined MoM due to the maintenance peak. SMM data showed that China's copper cathode production in April fell 2.26% MoM. Cumulative copper cathode production from January to April 2026 reached 4.7067 million mt. However, according to SMM, some smelters postponed their maintenance plans or completed crude smelting maintenance ahead of schedule to capture revenue from the by-product sulphuric acid. III. Breakdown of Smelter Profit Sources (i) Sulphuric Acid: The Strongest Profit Contributor at the Current Stage Sulphuric acid is currently the most important by-product profit source for smelters. In pyrometallurgy-based copper cathode production, approximately 3-4 mt of sulphuric acid is produced as a by-product for every 1 mt of copper cathode. As of May 15, the SMM China Copper Smelting Acid Index stood at 1,665 yuan/mt, up 83.7% from the beginning of the year. Sulphuric acid prices currently stay high, meaning sulphuric acid revenue can offset a considerable portion of the revenue loss caused by negative TCs. However, this "sulphuric acid moat" is facing policy challenges. China suspended exports of ordinary industrial sulphuric acid and smelting by-product sulphuric acid starting in May for a period of 8 months. The export ban is not intended to suppress domestic sulphuric acid prices, but rather to prioritize domestic supply for agricultural phosphate fertiliser production and strategic industries such as new energy. Demand side, overall sulphuric acid demand remains tight. Although downstream sectors including phosphate fertiliser, titanium dioxide, and new energy materials saw declining operating rates due to high-priced raw materials, just-in-time procurement still exists. Meanwhile, the supply side is also constrained by concentrated smelter maintenance and high sulphur-based acid production costs, with industry-wide capacity utilization rates at low levels. Cost side, firm sulphur prices provide bottom support for sulphuric acid; supply side, concentrated maintenance limits downside room; demand side, although weak, has not yet formed a substantial enough impact to break down high prices. This means sulphuric acid continues to serve as a profit pillar for smelters. (ii) Precious Metal Recovery: "Incremental Game" Under High Copper Prices In addition, copper concentrates typically contain associated precious metals such as gold and silver, which can be recovered through anode slime processing during smelting. Copper prices are currently at historically high levels, and gold prices also fluctuate at highs, greatly enhancing the economics of precious metal recovery. According to SMM market sources, when gold and silver prices are at high levels, raw materials with impurities rich in gold and silver are assigned extremely high added value. The profit contribution of precious metal recovery to smelters is reflected in: smelters can achieve recovery utilization rates exceeding the gold and silver payable indicators through refined processing, profiting from spot smelting revenue. This portion of revenue is often a significant component of smelters' comprehensive profit structure. However, as gold and silver prices continue to rise, suppliers in the copper concentrates spot trade are simultaneously raising gold and silver payable indicators. The continuously rising precious metal payable indicators and payable benchmark pose an increasingly severe challenge to smelter profitability. IV. Future Trends: Coexistence of Industry Landscape Evolution and Technology Upgrade Requirements However, industry chain profits are irreversibly shifting toward the upstream ore side. Under the medium and long-term landscape of persistently tightening copper concentrates supply and demand, the scarcity value of the resource side is being reassessed by the market. As the copper concentrates supply-demand gap persists over the medium and long-term horizon, and smelters' bargaining power will remain under pressure over the long term. The market is widely concerned about whether TC can quickly pull back in tandem once the continuously rising sulphuric acid prices reach a turning point. Facing the long-term trend of profit squeeze at the mine end and losses in the smelting segment, the future landscape of the copper smelting industry will evolve in the following directions: Direction 1: Integrated consolidation extending upstream. Enterprises with upstream mine assets will have a significant advantage in profitability. Direction 2: Technological upgrades to achieve differentiated competition. Against the backdrop of narrowing profit margins from non-payable metals, the technological barriers of smelters will become increasingly important. Those who can more efficiently extract valuable metals from low-grade ore or complex ore will seize the initiative in the industry reshuffle. Under the extreme environment of persistently negative TCs, sulphuric acid by-product revenue and precious metal recovery are the core profit pillars currently sustaining smelter operations. The supply-demand pattern dictates that the pricing power and profit margins at the mine end will continue to outperform those at the smelting end. The copper smelting industry is transitioning from the traditional model of "earning TCs" to a new competitive landscape of "resource control + technological barriers + integrated operations."
May 19, 2026 15:48
[SMM Analysis] Korea’s Automotive Industry: 2030 Competitiveness Depends on EV Transition Execution
[SMM Analysis] Korea’s Automotive Industry: 2030 Competitiveness Depends on EV Transition Execution
Korea’s auto industry maintained solid exports and production in 2025, but its 2030 competitiveness will depend on EV transition execution. The domestic market has matured, while hybrids have become a defensive pillar. EV adoption remains below the government’s target, and U.S.-EU policy pressure and Chinese EV competition are reshaping export strategies. Future competitiveness will hinge on pricing, localization, battery sourcing, and charging and safety confidence.
May 18, 2026 17:34
HSBC raises silver forecasts for 2026 and 2027 but warns upside may be limited
May 17, 2026 HSBC has increased its silver price forecasts for both 2026 and 2027, although the bank continues to expect limited upside for the precious metal over the medium term. HSBC now projects silver will average $75 per troy ounce in 2026 and $68 per ounce in 2027, compared with previous forecasts of $68.25 and $57, respectively. Silver Rally Fueled by Safe-Haven Demand and Tight Supply Silver surged to a record nominal high of $121 per ounce in late January, supported by soaring gold prices, constrained supply conditions and strong safe-haven demand linked to tariff concerns and geopolitical tensions. The metal later pulled back sharply to around $64 per ounce in early February following a conflict-driven rise in the U.S. dollar and weakness in gold prices, before recovering to trade above $86 per ounce. HSBC Sees Smaller Supply Deficits Ahead Despite raising its price outlook, HSBC maintained a cautious stance, arguing that shrinking supply deficits and softer industrial and jewellery demand are likely to prevent sustained gains. The bank expects the global silver market deficit to narrow to 73 million ounces in 2026 from 143 million ounces in 2025, before tightening further to 25 million ounces in 2027 as mine production and recycling supply increase. “Moderating deficits, in our view, will not be sufficient to propel silver sharply higher for prolonged periods,” said James Steel, chief precious metals analyst at HSBC. The bank expects prices to weaken during the second half of both 2026 and 2027. Industrial and Jewellery Demand Expected to Ease Industrial demand, which accounts for more than half of global silver consumption, declined to 657 million ounces in 2025 from a record 679 million ounces the previous year. HSBC said manufacturers have increasingly sought to reduce or substitute silver usage in response to elevated prices, and the bank expects that trend to continue. The bank forecasts industrial silver demand will decline further to 642 million ounces in 2026 and 618 million ounces in 2027. Jewellery demand is also projected to fall to 157 million ounces this year from 189 million ounces in 2025. Supply Growth Seen Supporting Market Rebalancing On the supply side, HSBC expects mine production to remain broadly unchanged at 848 million ounces in 2026 before rising to 868 million ounces in 2027. Recycling supply is forecast to increase to 216 million ounces this year from 197 million ounces in 2025. Dollar Weakness and Geopolitics Could Offer Support James Steel said expectations for a weaker U.S. dollar and ongoing geopolitical uncertainty could continue to provide some support for silver prices. However, he cautioned that “the gold:silver ratio is likely to widen, allowing silver to ease even if gold rallies.” HSBC set year-end silver price targets of $70 per ounce for 2026 and $65 per ounce for 2027. Source: https://www.msn.com/en-us/money/savingandinvesting/hsbc-raises-silver-forecasts-for-2026-and-2027-but-warns-upside-may-be-limited
May 18, 2026 16:25
World Bank Sees Precious Metals Surging 42% in 2026 Amid Global Turmoil
Published:May 13, 2026 The World Bank recently revised its precious metals outlook for 2026. The group now anticipates this basket of commodities to rise collectively by 42% in 2026. This represents a significant upward shift in projections, primarily fueled by the escalating Middle East conflict, rampant energy supply disruptions, dampened global growth, and heightened financial uncertainty. Precious Metals Lead the Commodity Complex In January 2026, the World Bank issued a commodities report that predicted a positive jump in its precious metals index for the year. This grouping holds gold, silver, and platinum, notably excluding palladium. Within Q1 alone, each asset in this basket of precious metals soared above the group’s expectations. Furthermore, each of these metals climbed to record highs in the early innings of the year. Gold prices shot up beyond $5,400/oz. Silver exploded to $116/oz. Platinum prices jumped to $2,770/oz. In late April, the World Bank issued another commodities report raising its precious metals outlook. Now, the group projects this collection of metals will surge by 42% throughout 2026, compared to the averages in 2025. Crucially, precious metals are projected to outperform nearly all other commodities, including base metals, fertilizer, and even energy prices. The global bank’s forecasts position silver as the highest-performing metal in 2026, with platinum as a close second. While gold is also expected to rise significantly, the yellow metal’s already elevated value means smaller percentage gains. Why the World Bank Expects Precious Metals to Rise A handful of long-running and newly forming factors are propelling the World Bank’s precious metals predictions higher for 2026. This fuel is a combination of geopolitical, macroeconomic, and fiscal policy issues: 1. Geopolitical Safe-Haven Demand Among the more pressing and immediate tailwinds for precious metals is war in Iran , which has spilt over into the broader Middle East region. The conflict has effectively choked off the Hormuz Strait, where nearly 20% of the world’s oil flows through. Drone and artillery attacks on various energy installations throughout the Gulf States further complicate the energy crisis. In response, investors have been actively rotating into safe-haven assets, such as precious metals, to offset the economically damaging effects of the oil shock and broader energy shortage. Historically, gold has consistently shown a tendency to perform well during periods of geopolitical turmoil and a loss of confidence in fiat systems. 2. Inflationary Energy Shock March marked the single largest inflation-adjusted quarterly rise in oil since 1988, per the Energy Information Administration . Throughout Q1, Brent crude nearly doubled, leaping from $61 to $118 per barrel. In March alone, liquid natural gas costs rose by 59% in European markets and by 94% in Asia. This collective surge in energy prices threatens to drive global inflation higher as loftier fuel costs drive up prices in virtually all sectors. The World Bank revised its inflation forecasts for Emerging Market and Developing Economies (EMDEs) to a staggering 5.1%. Once again, precious metals stand to gain, especially gold, which has a proven track record going back centuries for keeping pace with inflation . 3. Market Volatility & Policy Uncertainty The international financial institution further warns that the combination of geopolitical instability and rising inflation threatens to undermine market confidence and fiscal policy direction. Mainstream assets heavily tied to fiat currencies tend to wane during periods of high uncertainty, increasing the appeal of safe-haven assets . Gold demand is likely to increase from central banks, major financial institutions, and retail investors as traditional assets struggle. 4. Slowing Growth & Stagflation Risks At the same time, EMDE inflation is expected to rise, and growth across most economies is projected to fall, creating a one-two punch of economic hardship. This trend is playing out in advanced economies, too, with the U.S. gross domestic product hitting only 0.7% in Q4 2025 . The economy recovered slightly in Q1 2026, reaching 2%, according to the Bureau of Economic Analysis , but it remains far from ideal levels. Source: Bureau of Economic Analysis The alarming trifecta of slowing growth, rising inflation, and soaring commodity prices has the World Bank cautioning about the elevated odds of stagflation . In this challenging economic climate, all the tailwinds for precious metals would only intensify. Precious Metals Forecasts Remain Elevated Although precious metals have moderated since their early-year highs, experts across various sectors remain bullish on the upward potential of these commodities. Most notably, 2026 gold price forecasts remain above $6,000/oz. Meanwhile, silver price predictions for the year sit near $105/oz. These positive expectations fall right in line with the World Bank’s upward revision of its earlier predictions, signaling a strong potential for further growth among these key precious metals. Navigate Global Turmoil with Our Free Precious Metals Guide If you’re interested in learning more about how you can strategically position your portfolio to take advantage of these precious metals, grab a FREE copy of our Precious Metals Investment Guide . It covers everything you need to know about buying, holding, and managing physical gold and silver to protect your wealth. Source: https://www.sbcgold.com/blog/world-bank-sees-precious-metals-surging-42-in-2026-amid-global-turmoil/
May 18, 2026 16:16

Latest News

Stainless Steel Prices and Costs Pulled Back in Tandem, While Losses at Steel Mills Worsened [SMM Analysis]
Mar 20, 2026 17:04
Economic Advantages Failed to Offset Market Sentiment; Stainless Steel Scrap Declined This Week [SMM Stainless Steel Scrap Market Weekly Review]
Mar 20, 2026 15:28
[SMM Stainless Steel Daily Review] SS Futures Stopped Falling and Rebounded, Stainless Steel Spot Prices Rose Accordingly
[SMM Stainless Steel Daily Review] SS Futures Stopped Falling and Rebounded, Stainless Steel Spot Quotations Rose in Tandem SMM News, March 20: SS futures stopped falling and rebounded. Base metals futures generally recovered, with SS futures showing particularly strong performance and basically recouping this week’s losses, closing at 14,160 yuan/mt by the midday close. In the spot market, driven by the strong rebound in SS futures and coupled with stainless steel mill agents’ efforts to hold prices firm, stainless steel retail quotations also moved higher accordingly; supported by improving market sentiment, both inquiry activity and trading picked up. High-grade NPI prices remained in the doldrums, and the steel mill tender price for high-carbon ferrochrome was announced below market expectations, leaving weak cost support for stainless steel. The most-traded SS futures contract stopped falling and recovered. At 10:15 a.m., SS2605 was quoted at 14,150 yuan/mt, up 220 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the 220-420 yuan/mt range. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose by 50 yuan/mt; for cold-rolled trimmed 304/2B coil, the average price in Wuxi rose by 100 yuan/mt, and the average price in Foshan rose by 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi was flat; hot-rolled 316L/NO.1 coil quotations in Wuxi were unchanged; cold-rolled 430/2B coil in both Wuxi and Foshan held steady. Entering the traditional September-October peak season, although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and procurement only...
Mar 20, 2026 15:04
[SMM Analysis] Steel Mills Actively Increased Shipments, Coupled With Underlying Rigid Demand, and Stainless Steel Social Inventory Declined Slightly
Mar 19, 2026 17:46
[SMM Stainless Steel Daily Review] SS Futures Continued to Pull Back, and Stainless Steel Spot Quotes Were Lowered
[SMM Stainless Steel Daily Review] SS Futures Continued to Pull Back, Stainless Steel Spot Quotes Were Lowered SMM News on March 19: SS futures extended their further downward pullback. Against the backdrop of hawkish remarks from the US Fed and escalating geopolitical conflicts, non-ferrous metal futures generally moved lower, with SS also declining in tandem and closing at 13,935 yuan/mt by the midday break. In the spot market, continued declines in SS futures significantly weakened market confidence; coupled with the recent pullback in high-grade NPI prices, market expectations for cost support also softened. In a market where transactions had already been sluggish this week, inquiries and deals weakened further; in addition, March supply remained high, prompting traders to lower their quotes for 304 stainless steel during the day. However, supported by news yesterday that steel mills were holding prices firm, 200-series stainless steel rose against the trend, with 201 stainless steel prices moving higher. Further attention should still be paid to downstream end-user purchase conditions. The most-traded SS futures contract fell and pulled back. As of 10:15 a.m., SS2605 was quoted at 13,930 yuan/mt, down 100 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 340-540 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose 50 yuan/mt; for cold-rolled trim-edge 304/2B coil, the average price in Wuxi fell 150 yuan/mt and in Foshan fell 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi fell 200 yuan/mt; for hot-rolled 316L/NO.1 coil, Wuxi quotes fell 100 yuan/mt; cold-rolled 430/2... in both Wuxi and Foshan.
Mar 19, 2026 14:38
[SMM Daily Stainless Steel Review] SS Futures Fluctuated, Rising First and Then Falling Back; Spot Stainless Steel Quotations Edged Lower, and Transactions Recovered
[SMM Stainless Steel Daily Review] SS Futures Fluctuated, Rising First and Then Falling, While Spot Quotes Edged Lower and Transactions Recovered SMM News, March 17: SS futures moved sideways. During the day, SS futures rose first and then fell, overall maintaining a sideways movement pattern, and closed at 14,155 yuan/mt by the midday break. In the spot market, although SS futures were relatively strong in the morning, affected by the previous cuts in guidance prices by major stainless steel mills, trader quotes still edged slightly lower than yesterday. However, market sentiment had stabilized somewhat, and amid the price pullback, both inquiries and transactions increased to some extent. The most-traded SS futures contract fluctuated. As of 10:15 a.m., SS2605 was quoted at 14,220 yuan/mt, up 175 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi stood at 200-400 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi fell by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi fell by 50 yuan/mt, and the average price in Foshan also fell by 50 yuan/mt; cold-rolled 316L/2B coils in Wuxi were basically stable; hot-rolled 316L/NO.1 coils were quoted basically stable in Wuxi; cold-rolled 430/2B coils in both Wuxi and Foshan were basically stable. As the traditional peak consumption season of "Golden March and Silver April" began, the stainless steel market entered a window for demand recovery, with downstream end-users gradually recovering. Recently, activity in inquiries and purchases increased markedly, but stainless steel spot prices overall remained basically stable, with no obvious fluctuations. End-user procurement was still mainly driven by rigid demand, and the full bustle of the peak season had yet to emerge, ...
Mar 17, 2026 14:47
[SMM Stainless Steel Daily Review] SS Futures Fell and Pulled Back, Coupled with Steel Mill Price Adjustments, and Strong Wait-and-See Sentiment Among Downstream Buyers
[SMM Stainless Steel Daily Review] SS Futures Fell Back as Steel Mill Price Adjustments Dampened Downstream Buying Interest SMM News, March 16: SS futures showed a downward pullback. Although the contract was relatively stable during Friday's night session, Monday's open was dragged lower by a broad decline across the nonferrous metals sector, with SS also pulling back to close at 14,185 yuan/mt by midday. In the spot market, affected by the decline in SS futures and an overall cut of 200 yuan/mt in the morning guidance prices from a major stainless steel mill, retail quotations in the market edged lower. Price fluctuations fueled stronger wait-and-see sentiment among downstream buyers, and intraday transactions were weak. However, market feedback indicated that transactions had been broadly steady earlier, and coupled with relatively strong expectations for the cost side of stainless steel, most market participants had not expected this round of price cuts. Traders' spot quotations fell by less than the reduction in the guidance price. The most-traded SS futures contract pulled back after falling. As of 10:15 a.m., SS2605 was quoted at 14,045 yuan/mt, down 230 yuan/mt from the previous trading day. Spot premiums for Wuxi 304/2B were in the range of 245-445 yuan/mt. In the spot market, Wuxi cold-rolled 201/2B coils were generally stable; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi fell by 50 yuan/mt and the average price in Foshan fell by 50 yuan/mt; Wuxi cold-rolled 316L/2B coils were stable; Wuxi quotations for hot-rolled 316L/NO.1 coils were stable; cold-rolled 430/2B coils in both Wuxi and Foshan were also stable. As the traditional peak consumption season of "Golden March and Silver April" begins, the stainless steel market is entering a window for demand recovery, with downstream end-users gradually resu...
Mar 16, 2026 15:47
[SMM Analysis] Stainless Steel Social Inventory Stopped Rising and Pulled Back, with Recovering Demand in the March-April Peak Season Driving Mild Destocking
Mar 12, 2026 16:58
[SMM Stainless Steel Daily Review] SS Futures Held Up Well; Spot Prices Remained Stable, with Just-in-Time Procurement Dominating
[SMM Stainless Steel Daily Review] SS Futures Held Up Well, Spot Prices Remained Stable with Just-in-Time Procurement Dominating SMM News, March 12: SS futures showed a firm sideways movement. As geopolitical tensions in Iran continued to escalate and the US restarted the tariff war, macro news still had a notable disruptive effect on futures, and SS futures had yet to show a clear direction, closing at 14,245 yuan/mt by the midday break. In the spot market, affected by the sideways movement in futures, spot quotations continued to hold steady. Although the market has entered the traditional peak consumption season and downstream demand has recovered somewhat, expectations of high supply capped sentiment, limiting market acceptance of high-priced cargoes. Downstream players mainly made just-in-time procurement, while traders actively shipped goods for destocking. The most-traded SS futures contract fluctuated higher. At 10:15 a.m., SS2605 was quoted at 14,290 yuan/mt, up 170 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi stood at 230-430 yuan/mt. In the spot market, cold-rolled 201/2B coils in Wuxi were generally stable; for cold-rolled trimmed-edge 304/2B coils, average prices in Wuxi and Foshan both held steady; cold-rolled 316L/2B coils in Wuxi remained stable; for hot-rolled 316L/NO.1 coils, Wuxi quotations held steady; and cold-rolled 430/2B coils in both Wuxi and Foshan were also stable. As the market entered the traditional peak consumption season of "Golden March and Silver April," the stainless steel market saw a window for demand recovery. The downstream side gradually resumed work and production after the Chinese New Year holiday, and demand showed a trend of gradual recovery. However, although transactions improved from the previous period, the market still did not show the briskness typical of the peak season, and end-user procurement was mainly...
Mar 12, 2026 15:19
[SMM Stainless Steel Daily Review] SS Futures Were in the Doldrums, While Spot Stainless Steel Held Steady, with Rigid Demand Dominating
[SMM Stainless Steel Daily Review] SS Futures Were in the Doldrums, While Spot Stainless Steel Held Steady with Just-in-Time Procurement Dominating SMM News on March 11: SS futures showed a weak fluctuating trend. Since March, they had continued to move sideways in the 14,000-14,400 range. Affected by the continued escalation of geopolitical conflicts, SS futures extended their fluctuating trend, closing at 14,210 yuan/mt by the midday session. In the spot market, driven by the sideways movement in futures, spot traders' quotations generally held steady. Downstream end-users mainly made just-in-time procurement, while the earlier bullish sentiment had been fully exhausted, leaving insufficient willingness for advance purchases and stockpiling. However, as the traditional peak season gradually approaches, fundamental demand can still be maintained, and market participants expect stainless steel prices to remain strongly supported by costs within the month. The most-traded SS futures contract fluctuated downward. As of 10:15 a.m., SS2604 was quoted at 14,105 yuan/mt, down 190 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi stood in the 400-600 yuan/mt range. In the spot market, cold-rolled 201/2B coils in Wuxi all held steady; for cold-rolled burr-edge 304/2B coils, average prices in both Wuxi and Foshan held steady; cold-rolled 316L/2B coils in Wuxi held steady; for hot-rolled 316L/NO.1 coils, Wuxi quotations held steady; and cold-rolled 430/2B coils in both Wuxi and Foshan held steady. As the market entered the traditional peak consumption season of "Golden March and Silver April," the stainless steel market ushered in a window for demand recovery. The downstream demand side successively resumed work and production after the Chinese New Year holiday, and demand showed a gradual recovery trend. However, although transactions improved from the previous period, the market had yet to show the brisk activity typical of the peak season, ...
Mar 11, 2026 15:00
[SMM Stainless Steel Daily Review] Easing Geopolitical Sentiment Supports Base Metals; SS Futures Held Up Well and Fluctuated Upward
[SMM Stainless Steel Daily Review] Easing Geopolitical Sentiment Supports Base Metals; SS Futures Hold Up Well and Fluctuate Upward SMM News on March 10: SS futures showed a hold-up-well, rangebound pattern. US President Trump said regarding the situation related to Iran that “the war is about to end,” which supported base metals futures and led to signs of strengthening. SS futures also rose in tandem, closing at 14,265 yuan/mt by the midday close. In the spot market, driven by stronger SS futures, traders turned more optimistic and confidence improved, with fewer low-priced supplies in the market. Downstream end-users still mainly made just-in-time procurement, and overall transactions remained steady. The most-traded SS futures contract fluctuated downward. At 10:15 a.m., SS2604 was quoted at 14,310 yuan/mt, up 100 yuan/mt from the previous trading day. In Wuxi, spot premiums for 304/2B were in the 210-410 yuan/mt range. In the spot market, Wuxi cold-rolled 201/2B coils were generally stable; for cold-rolled trimmed-edge 304/2B coils, the average price in Wuxi was stable and the average price in Foshan was stable; cold-rolled 316L/2B coils in Wuxi were stable; hot-rolled 316L/NO.1 coils in Wuxi were quoted stable; and cold-rolled 430/2B coils in both Wuxi and Foshan were stable. As the traditional peak consumption season of “Golden March and Silver April” begins, the stainless steel market is entering a window for demand recovery. Downstream demand is gradually returning as market participants resume work and resume production after the Chinese New Year holiday, but although transactions improved compared with the earlier period, the bustling peak-season momentum has yet to emerge. End-user procurement remains mainly just-in-time, and stockpiling willingness is relatively low. On the futures side, driven by risk aversion triggered by geopolitical conflicts...
Mar 10, 2026 12:55
Demand Recovery Coupled With Catch-Up Gains, Stainless Steel Scrap Market Rises [SMM Stainless Steel Scrap Market Weekly Review]
Mar 6, 2026 16:53
Rising Costs Supported Spot Cargo, Stainless Steel Mills’ Profit Margins Narrowed [SMM Analysis]
Mar 6, 2026 16:41
[SMM Stainless Steel Daily Review] SS Futures Traded in a Choppy Range; Bullish Sentiment in the Stainless Steel Spot Market Weakened
[SMM Stainless Steel Daily Review] SS Futures Trade Rangebound; Bullish Sentiment for Spot Stainless Steel Weakens SMM News on March 6: SS futures showed a pattern of holding up well. SS moved in the doldrums during the night session, but after the daytime session opened, it gradually strengthened and probed higher, finally closing at 14,115 yuan/mt. In the spot market, spot quotes pulled back in the morning under the influence of weaker SS performance in the night session; however, as futures fluctuated upward, spot quotes also followed with some gains, and the overall adjustment was limited. Recently, affected by factors such as expectations for a high stainless steel production schedule in March, a slowdown in the rise of high-grade NPI prices, and a slow recovery in downstream demand, traders’ earlier bullish expectations have weakened somewhat, and their willingness to make shipments has increased. The most-traded SS futures contract fluctuated upward and strengthened. At 10:15 a.m., SS2604 was quoted at 14,240 yuan/mt, down 35 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the 280-480 yuan/mt range. In the spot market, Wuxi cold-rolled 201/2B coils were generally steady; for cold-rolled mill-edge 304/2B coils, the average price in Wuxi fell 25 yuan/mt, while the average price in Foshan was steady; cold-rolled 316L/2B coils in Wuxi were steady; hot-rolled 316L/NO.1 coils in Wuxi were quoted steady; cold-rolled 430/2B coils in both Wuxi and Foshan were steady. As the market enters the traditional peak consumption season of “Golden March and Silver April,” the stainless steel market is seeing a window for demand recovery. Downstream demand has gradually resumed work and production after the Chinese New Year holiday, and demand is showing a gradual recovery trend. However, although transactions have improved compared with the earlier period, the bustling peak-season momentum has yet to emerge. End-user procurement is mainly driven by rigid demand, with stockpiling…
Mar 6, 2026 15:00
[SMM Analysis] Explaining Indonesia's Centralized State-run Management of Resource Exports and Future Possibilities
[SMM Analysis] Explaining Indonesia's Centralized State-run Management of Resource Exports and Future Possibilities
On May 20, 2026, Indonesian President Prabowo Subianto announced during a plenary session of the National Congress that the government has officially signed a groundbreaking regulation targeting the governance of natural resource exports. This bold policy framework will establish a dedicated state-managed natural resource export agency, executing exports through State-Owned Enterprises (BUMN) acting as government-designated single exporters. According to local media disclosures and presentation slides shown during the session, this centralized mechanism will initially apply to palm oil, coal, and ferroalloys (paduan besi). Under this system, direct private export transactions will be phased out, forcing overseas buyers and Indonesian producers to route contracts, logistics, and payments entirely through state-appointed BUMN nodes. 1. The Two-Phase Implementation Timeline Based on the official policy schematic diagrams disclosed on-site, the transition to a centralized BUMN-led export model will occur in two distinct regulatory phases: Phase 1 (Transition) Time : June 1, 2026 - August 31, 2026 Mechanics : Private enterprises continue to manage some internal administrative and logistics steps. However, all existing and new import-export transactions with overseas buyers must begin a step-by-step migration to BUMN entities. Phase 2 (Full Monopsony) Time : September 1, 2026, Onward Mechanics : Complete takeover. All transaction flows, sales contracts, export declarations, customs clearance, shipping arrangements, and the collection of export earnings (DHE) will be fully managed or led by designated BUMN. 2. Deep Structural Intervention: Pre- to Post-Clearance This regulatory mechanism does not simply install a government "rubber stamp." Instead, it represents a fundamental reallocation of the entire export trade chain, deeply embedding BUMN across three key logistics and financial phases: [Pre-Clearance] ──> [Clearance] ──> [Post-Clearance] (Contracts & Docs) (Customs & Loading) (Payment & FX DHE) Pre-Clearance (Contract & Goods Preparation): This covers verifying legality, IUP mining licenses, export restrictions (Lartas) compliance, sales contract drafting, finalizing payment terms, commercial invoicing, and vessel chartering/cabin bookings. Clearance (Customs & Physical Shipment): Includes filing export declarations (PEB), managing customs system approvals, cargo transport from smelter warehouses to port terminals, loading shipments, and issuing Bills of Lading (B/L). Post-Clearance (Documentation & Capital Flow): BUMN will act as the principal intermediary, dispatching trade documents (B/L, Commercial Invoice, Packing List, Certificate of Origin/COO) to the buyer's issuing bank and managing the repatriation of export proceeds (DHE) under strict domestic banking provisions. 3. The Billion-Dollar Question: Will NPI and FeNi be Classified as "Ferroalloys"? For the global stainless steel and electric vehicle battery supply chains, the immediate focal point is how Indonesia defines the scope of "ferroalloy" (paduan besi). Market consensus strongly suggests that the "ferroalloys" under discussion are highly likely targeting Nickel Pig Iron (NPI), which represents a massive trade flow of approximately 11.5 million tons of Indonesian NPI exports in 2025. However, because the official, legally binding regulation "signed" by the government has not yet been formally released to the public, further clarification is needed to verify the exact scope of affected materials. Crucially, the leaked written draft of the regulation does not actually mention "ferroalloys" at all. The term "ferroalloy" (paduan besi) was only verbally highlighted and presented by President Prabowo during the House of Representatives Plenary Session (Rapat Paripurna DPR) on Wednesday (20/5). According to the leaked draft text, the actual written scope of the law is structured as follows: CHAPTER II: DETERMINATION OF STRATEGIC NATURAL RESOURCE COMMODITIES Article 2 (1) Strategic Natural Resource Commodities subject to export governance include: a. coal; b. palm oil; and c. other strategic natural resource commodities. (2) The Government may amend the Strategic Natural Resource Commodities as referred to in paragraph (1) letters a and b, and establish other Strategic Natural Resource Commodities as referred to in letter c through a coordinated meeting (rapat koordinasi) led by: a. the minister responsible for synchronization, coordination, and control of ministerial affairs in the field of the economy (Coordinating Minister for Economic Affairs / Menko Perekonomian); or b. the minister responsible for synchronization, coordination, and control of ministerial affairs in the field of food (Coordinating Minister for Food / Menko Pangan), attended by relevant ministers/heads of non-ministerial agencies. This clause reveals a crucial legal framework: any expansion of the export control list to designate NPI, FeNi, or related ferronickel alloys under "other strategic commodities" is strictly required to be determined through a formal coordinated meeting (rapat koordinasi) led by either the Coordinating Minister for Economic Affairs or the Coordinating Minister for Food. Because the written regulation itself is silent on "ferroalloys," the legal scope of the policy has not been fixed yet. Until this high-level inter-ministerial coordination meeting (rapat koordinasi) takes place and issues a definitive annex list with matching HS codes, the practical impact on NPI trade remains pending official confirmation. Should nickel-iron intermediates formally fall under the BUMN single-exporter mandate after this meeting, SMM foresees four critical structural disruptions: I. Erosion of Direct Negotiation Flexibility Currently, Indonesian NPI is sold through a highly flexible ecosystem of steel mills, global trading desks, independent brokers, and back-to-back supply contracts. Forcing these contracts to route through a single state exporter compresses the operational room for direct price discovery, spot volume locking, and rapid high-frequency reselling. II. Absolute Export Price Transparency By funneling all sales contracts, shipping invoices, and foreign exchange collection (DHE) through state-owned channels, the Indonesian government will gain real-time, absolute transparency over actual transaction prices. This complements Indonesia's ongoing tightening of domestic mining benchmarks (HPM), the annual RKAB quota system, and the strict requirement for export proceeds to be held in domestic bank accounts. III. Disintermediation of Traders and Brokers In-transit or port-stored nickel-iron inventories have historically served as highly liquid financial assets for brokers and traders who leverage transfer orders and back-to-back contracts. Standardizing all contract entities and payment channels under BUMN will squeeze the margins of non-producing traders, rendering physical spot market quotes highly rigid. IV. Export Execution Delays Migrating long-term off-take agreements to BUMN templates will trigger significant friction during the Phase 1 transition. SMM expects delays stemming from contract re-signings, banking channel adjustments, letter of credit (L/C) re-issuances, and initial administrative coordination at port customs, temporarily disrupting short-term port-arrival schedules. 4. Market and Price Impact Analysis (If NPI were to be Involved) Short-Term Sentiment vs. Medium-Term Realities Short-Term (Sentiment-Driven): The direct impact on physical NPI shipping volumes returning to China will remain limited during the initial transition window, as private exporters continue to assist with logistics. However, given tight domestic nickel ore supplies, production cuts at several RKEF plants, and already declining NPI shipments, the market will likely digest this announcement as a fresh supply-side threat, driving up bullish sentiment. Medium-Term (Structural Shifts): If NPI is formally included in the HS code list, Chinese stainless steel mills will face centralized Indonesian state sellers. This will result in stronger payment scrutiny, fewer options for non-standard flexible transactions, and the virtual elimination of low-cost, off-market FOB deals. Transaction Costs vs. Production Costs Unlike mining-end disruptions such as rising HPM benchmarks, declining laterite ore grades, or restricted RKAB quotas, this export centralization policy does not directly raise the physical smelting cost of NPI. Instead, it functions as a tax on transaction efficiency, increasing compliance burdens, administrative delays, and state oversight on pricing. SMM concludes that the impact of this policy is an increase in "transaction-side friction" rather than raw production costs, which will ultimately support sellers' intentions to hold prices firm and reinforce the price rigidity of high-nickel pig iron. 5. SMM Outlook Indonesia’s new export regulation signals that its resource nationalism is successfully extending its reach beyond the mine gate and tax office, directly into the global sales and trading arena. However, the key takeaway is that nothing is legally set in stone for the nickel industry yet. Because the written regulation currently leaves the door open under "other strategic commodities," and the word "ferroalloy" was only delivered verbally by the President on Wednesday (20/5), the entire framework remains unfixed. The critical indicator for the nickel chain over the coming weeks is whether the upcoming inter-ministerial rapat koordinasi formally adopts the HS codes for NPI and FeNi into the final regulatory annex.
May 20, 2026 18:42
[SMM Conference] 2026 SMM (3rd) GRMI: Gathering Industry Leaders amid Global Push for Sustainable Development
[SMM Conference] 2026 SMM (3rd) GRMI: Gathering Industry Leaders amid Global Push for Sustainable Development
May 20, 2026 13:39
[SMM Analysis] Copper-related Policy Shifts Across the Americas - The United State
[SMM Analysis] Copper-related Policy Shifts Across the Americas - The United State
May 20, 2026 11:35
Copper Concentrate TCs Break Through Negative Triple Digits: What Challenges Do Smelters Face?
Copper Concentrate TCs Break Through Negative Triple Digits: What Challenges Do Smelters Face?
May 19, 2026 15:48
[SMM Analysis] Korea’s Automotive Industry: 2030 Competitiveness Depends on EV Transition Execution
[SMM Analysis] Korea’s Automotive Industry: 2030 Competitiveness Depends on EV Transition Execution
May 18, 2026 17:34
HSBC raises silver forecasts for 2026 and 2027 but warns upside may be limited
HSBC raises silver forecasts for 2026 and 2027 but warns upside may be limited
May 18, 2026 16:25
World Bank Sees Precious Metals Surging 42% in 2026 Amid Global Turmoil
World Bank Sees Precious Metals Surging 42% in 2026 Amid Global Turmoil
May 18, 2026 16:16
Latest News
[SMM Analysis] Rigid Demand Remained Steady During the Peak March Season, Stainless Steel Inventory Edged Up Slightly While Destocking Pressure Persisted
Mar 26, 2026 17:36
[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher, While Confidence in the Stainless Steel Spot Market Gradually Recovered
Mar 24, 2026 14:24
[SMM Stainless Steel Daily Review] SS Futures Fluctuated Higher, and Stainless Steel Spot Prices Followed the Upward Trend
Mar 23, 2026 13:22
Stainless Steel Prices and Costs Pulled Back in Tandem, While Losses at Steel Mills Worsened [SMM Analysis]
Mar 20, 2026 17:04
Economic Advantages Failed to Offset Market Sentiment; Stainless Steel Scrap Declined This Week [SMM Stainless Steel Scrap Market Weekly Review]
Mar 20, 2026 15:28
[SMM Stainless Steel Daily Review] SS Futures Stopped Falling and Rebounded, Stainless Steel Spot Prices Rose Accordingly
Mar 20, 2026 15:04
[SMM Analysis] Steel Mills Actively Increased Shipments, Coupled With Underlying Rigid Demand, and Stainless Steel Social Inventory Declined Slightly
Mar 19, 2026 17:46
[SMM Stainless Steel Daily Review] SS Futures Continued to Pull Back, and Stainless Steel Spot Quotes Were Lowered
Mar 19, 2026 14:38
[SMM Daily Stainless Steel Review] SS Futures Fluctuated, Rising First and Then Falling Back; Spot Stainless Steel Quotations Edged Lower, and Transactions Recovered
Mar 17, 2026 14:47
[SMM Stainless Steel Daily Review] SS Futures Fell and Pulled Back, Coupled with Steel Mill Price Adjustments, and Strong Wait-and-See Sentiment Among Downstream Buyers
Mar 16, 2026 15:47
Stainless Steel Spot Prices Remained Stable as Rising Raw Material Costs Squeezed Steel Mill Profits [SMM Analysis]
Mar 13, 2026 16:58
Cost Advantages and Demand Support Drove Stainless Steel Scrap Prices Higher [SMM Stainless Steel Scrap Market Weekly Review]
Mar 13, 2026 16:02
[SMM Stainless Steel Daily Review] SS Futures Struggled to Break Out of Rangebound Trading, While Spot Prices Held Steady Amid Active Shipments
Mar 13, 2026 15:06
[SMM Analysis] Stainless Steel Social Inventory Stopped Rising and Pulled Back, with Recovering Demand in the March-April Peak Season Driving Mild Destocking
Mar 12, 2026 16:58
[SMM Stainless Steel Daily Review] SS Futures Held Up Well; Spot Prices Remained Stable, with Just-in-Time Procurement Dominating
Mar 12, 2026 15:19
[SMM Stainless Steel Daily Review] SS Futures Were in the Doldrums, While Spot Stainless Steel Held Steady, with Rigid Demand Dominating
Mar 11, 2026 15:00
[SMM Stainless Steel Daily Review] Easing Geopolitical Sentiment Supports Base Metals; SS Futures Held Up Well and Fluctuated Upward
Mar 10, 2026 12:55
Demand Recovery Coupled With Catch-Up Gains, Stainless Steel Scrap Market Rises [SMM Stainless Steel Scrap Market Weekly Review]
Mar 6, 2026 16:53
Rising Costs Supported Spot Cargo, Stainless Steel Mills’ Profit Margins Narrowed [SMM Analysis]
Mar 6, 2026 16:41
[SMM Stainless Steel Daily Review] SS Futures Traded in a Choppy Range; Bullish Sentiment in the Stainless Steel Spot Market Weakened
Mar 6, 2026 15:00