Aluminum Alloy Rebounded from Low-Level Support in Night Session, Spot Cargo Dominated by Rigid Demand with Sluggish Trading [SMM Cast Aluminum Alloy Morning Comment]

Published: May 25, 2026 08:53
[SMM Cast Aluminum Alloy Morning Comment: Aluminum Alloy Rebounded from Low-Level Support in Night Session, Spot Cargo Dominated by Rigid Demand with Sluggish Trading] Last Friday, the ADC12 market overall continued a stable-price wait-and-see pattern, with cautious market sentiment. The SMM ADC12 price remained stable from the previous day at 23,700 yuan/mt.

5.25 SMM Cast Aluminum Alloy Morning Comment

Futures: During the night session last Friday, the aluminum alloy 2607 contract showed a pattern of initial decline followed by recovery, moving sideways. The contract opened at 23,175 yuan/mt, reached a high of 23,175 yuan/mt, a low of 22,980 yuan/mt, and closed at 23,105 yuan/mt, down slightly by 15 yuan from the previous settlement price, a decline of 0.06%. In the early part of the night session, prices dropped rapidly, then found support at lower levels and gradually rebounded, closing slightly higher at the end of the session, with overall fluctuations remaining limited. Trading volume was 1,582 lots, open interest was 15,096 lots, down slightly by 3 lots, with cautious market trading sentiment and weak tug-of-war between longs and shorts.

Spot-futures price spread daily report: According to SMM data, on May 22, the SMM ADC12 spot price had a theoretical premium of 550 yuan/mt over the most-traded cast aluminum alloy contract (AD2607) closing price at 10:15 AM.

Warrant daily report: SHFE data showed that on May 22, total registered warrants for cast aluminum alloy were 39,131 mt, an increase of 89 mt from the previous trading day. Among them, Shanghai had a total registered volume of 2,515 mt, unchanged from the previous trading day; Guangdong had a total registered volume of 10,797 mt, a decrease of 91 mt from the previous trading day; Jiangsu had a total registered volume of 7,532 mt, unchanged from the previous trading day; Zhejiang had a total registered volume of 12,153 mt, an increase of 180 mt from the previous trading day; Chongqing had a total registered volume of 5,139 mt, unchanged from the previous trading day; Sichuan had a total registered volume of 995 mt, unchanged from the previous trading day.

Aluminum scrap: Last Friday, SMM A00 prices stopped rising and pulled back, down 40 yuan/mt from the previous trading day, while the aluminum scrap market remained generally stable with minor adjustments in some regional products. Aluminum scrap prices are expected to hold up well at elevated levels this week, with shredded aluminum tense scrap (priced based on aluminum content) maintaining a mainstream range of 20,500-21,100 yuan/mt (tax-exclusive). On the policy side, "reverse invoicing" regulatory oversight continues, and the tight supply of compliant sources is unlikely to reverse in the short term; the lagging effect of imported aluminum scrap continues to emerge, with actual port arrivals contracting and expected to further intensify tight supply; geopolitical risks provide floor support for aluminum prices, which in turn pushes up aluminum scrap prices. However, the peak season effect is fully winding down, with end-use demand orders weakening; wrought aluminum alloy scrap raw material inventory in Henan and other regions remains elevated, suppressing procurement demand, and the secondary aluminum market is expected to continue its pattern of weak supply and demand.

Silicon metal: Last week, SMM east China oxygen-blown #553 silicon was at 9,000-9,200 yuan/mt, and #441 silicon was at 9,300-9,400 yuan/mt. The most-traded contract on the futures market moved sideways around 8,450 yuan/mt. Silicon metal prices moved sideways under expectations of both supply and demand increases. Weekend news about a mine accident in Shanxi may trigger short-term fluctuations in coal prices on the raw material side for silicon metal, providing a sentiment boost. Attention should be paid to changes in the pace of operating rates on both supply and demand sides.

Markets outside China: Current import ADC12 quotes are in the high range of $3,380-3,420/mt, with an immediate import loss of approximately 3,365 yuan/mt, and the theoretical import window remains closed.

Summary: Last Friday, the ADC12 market overall continued its stable wait-and-see pattern, with cautious market sentiment, and the SMM ADC12 price held steady at 23,700 yuan/mt from the previous day. Current prices are "under pressure from both sides" — on one hand, end-use demand recovery remains limited, downstream procurement stays at just-needed levels, and insufficient transaction volume constrains upward momentum; on the other hand, raw material costs such as aluminum scrap remain elevated, compliant aluminum scrap circulation is tight, enterprises face difficulties in replenishing raw materials and are forced to rely more on existing inventory to maintain production, with cost support remaining evident. Overall, the market is still in a tug-of-war phase between "high cost support" and "weak demand suppression," and ADC12 prices are expected to continue holding up well in a narrow range in the short term.

[Data source disclaimer: Data other than publicly available information is derived from public information, market communication, and SMM's internal database models, processed by SMM for reference only and does not constitute decision-making advice.]

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Anhui Haili Casting Advanced Capacity Project Plans to Add Multiple Aluminum Die-Casting Lines
Common.Time.minsAgo
Anhui Haili Casting Advanced Capacity Project Plans to Add Multiple Aluminum Die-Casting Lines
Read More
Anhui Haili Casting Advanced Capacity Project Plans to Add Multiple Aluminum Die-Casting Lines
Anhui Haili Casting Advanced Capacity Project Plans to Add Multiple Aluminum Die-Casting Lines
[SMM Express] According to reports, the Anhui Hanshan Haili Green Casting Advanced Capacity Project is being accelerated. The project covers a total land area of 79,000 m², with a building area of approximately 49,000 m². Plant No. 1 was completed in February and entered trial production. The main structure of Plant No. 2 is expected to be completed by month-end of May, with equipment installation set to begin in August. Upon completion, the project plans to add 1 cast iron line, 3 aluminum die-casting lines, and 1 compressor recycling and disassembly line to further expand capacity.
Common.Time.minsAgo
Tuopu Group Established New Auto Parts Subsidiary in Guangzhou
Common.Time.minsAgo
Tuopu Group Established New Auto Parts Subsidiary in Guangzhou
Read More
Tuopu Group Established New Auto Parts Subsidiary in Guangzhou
Tuopu Group Established New Auto Parts Subsidiary in Guangzhou
[SMM Express] Tuopu Group's subsidiary, Guangzhou Tuopu Auto Parts Co., Ltd., was established, with a business scope covering R&D and manufacturing of auto parts and accessories, remanufacturing of auto parts, and wholesale of auto parts and accessories. Equity penetration showed that the company is 100% wholly owned by Tuopu Group.
Common.Time.minsAgo
Haiwei Shares Broke Ground on Fujian NEV Lightweight Project
Common.Time.minsAgo
Haiwei Shares Broke Ground on Fujian NEV Lightweight Project
Read More
Haiwei Shares Broke Ground on Fujian NEV Lightweight Project
Haiwei Shares Broke Ground on Fujian NEV Lightweight Project
[SMM Express] According to reports, on May 18, Ningbo Haiwei Auto Parts Co., Ltd. held a groundbreaking ceremony for its Fujian Wuping NEV lightweight product manufacturing project. The project is a key new energy industry project introduced by Wuping County, Fujian, with a planned land area of 146 mu, including 50 mu for Phase I and 96 mu for Phase II. It is expected to build a modern industrial park integrating R&D, production, and supporting facilities. Upon completion and commissioning, the project is expected to form an annual capacity of 330,000 NEV auto body and chassis lightweight core parts.
Common.Time.minsAgo
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?sign in here